From Mesa Boogie:
The CLEARLINK (SEND) LINE DRIVER is designed to compensate for losses in Tone due to increased capacitance in long cable runs. With a high quality buffer and +12dB of available output gain, it has the ability to drive cable runs of up to 330 Ft./100M before noticeable degradation, when added in-line on the feed from Pedal Board to Amplifier. When combined with a STOWAWAY INPUT BUFFER on the Instrument, the CLEARLINK SEND forms an Effects Loop for the Instrument-Pedal Board-Amp signal chain that will reclaim the integrity of your sound through boosted levels and buffering or impedance matching. Whether used by itself, or with the STOWAWAY as a comprehensive Front End solution, it will provide the needed stable impedance source� to ensure the pieces in your rig communicate well. It can be used for balanced signals via two different output jacks; standard 3-pin XLR or� TRS. It also supports unbalanced signals via the standard� mono jack. If you’re going to send your signal on a marathon, make sure you have a clear link to communicate because you don’t want your Tone lost in translation.
CLEARLINK SEND LINE DRIVER FEATURES
Made in Petaluma, California with the World’s Finest Materials
High-Speed, Low Noise Op-Amp based Line-Driver Circuit
RFI Filtering minimizes radio-frequency interference and noise
Provides Balanced or Unbalanced Output capable of driving long cable runs and provides amp with a resolute source
Output Level Control – Adjusts the Output Level of the integrated line-driver circuit, from Unity to +12dB.
Balanced XLR Output Drive cable runs up to 330ft with unsurpassed noise immunity and signal integrity.
Unbalanced Output – Drive long cable runs direct to your amp’s input
On/Off Status LED
9VDC External Power Jack Input (power supply not included)
9VDC THRU – Passes the power received at the 9VDC IN jack onto a MESA Stowaway Input Buffer
Input Impedance: 1M Ohm
Output Impedance: 150 Ohm Unbalanced / 300 Ohm Balanced
Output Buffer Design: High-Speed, Low Noise Op-Amp
Nominal Operating Voltage: 9VDC
Maximum Operating Voltage: 12VDC
Typical Current Draw: 10mA @ 9VDC
DC Adapter (not included): WARNING!!! To avoid immediate damage and voiding the warranty, the External Power Supply MUST be 9VDC with a NEGATIVE CENTER and a 2.1mm x 5.5mm Barrel Plug
Shipping & ReturnsFree Shipping
Most orders over $99.00 ship for free inside the lower 48 states. Certain items that are large and heavy do not qualify for free shipping.
We Ship Worldwide!
For information on International Shipping, please call, email or use live chat for rates. Orders shipping outside the Lower 48 States to Hawaii, Alaska, Puerto Rico and international orders do not qualify for free shipping. Orders shipping to U.S. Military APO/FPO addresses, PO Boxes, and US territories (Guam, Virgin Islands, etc.) can only ship USPS. NOTE: Boxes over 70 lbs each cannot be shipped to these locations.
As a security precaution, orders over $200.00 will only ship to the address your credit card company has on file for you.
*Korg and Mesa/Boogie products are only available for shipment within the USA.
14 Day Return for Merchandise Credit or Exchange
We're so sure you'll enjoy shopping with us that if for any reason, you're not completely satisfied with any item you receive from Matt's Music, simply call us within 14 days of the time you receive your merchandise for either a full in-store credit, or exchange - all entirely up to you. Items must be in brand new, factory fresh, resalable condition with all original packing materials, warranty cards and owners manuals, and show no signs of wear or abuse. All returns are subject to inspection. Special order items that are not normally stocked are non returnable. Ask if your purchase qualifies before you buy. Credit/exchange is for merchandise only and does not include any shipping charges. No refunds are issued in any case. Layaways are good for 60 days and layaway deposits are non refundable.
Early Order Cancellation
All deposits are non refundable. Lots of our products are special orders and in many cases your order has to be built for you at the factory. This is what makes a lot of our products special. Once your order is started, it's being put together just for you. For this reason we ask that you don't cancel your order after you place it with us. If for some reason you absolutely have to cancel your order with us, we will assess you a 25% cancellation charge. This amount is equal to 25% of your total order amount. Ask us before you place your order to see if what you're purchasing is considered a special order.
Do not accept your shipment if the package shows any signs of external damage. After the item is returned to us we will ship you a replacement. If you receive incorrect or defective merchandise, please call 781-335-0700 within 5 days for a return authorization number.