Earthquaker Devices Gary Modulation Fuzz & Overdrive Pedal

Description

From Earthquaker Devices:

EarthQuaker Devices is proud to introduce you to your new best bud, Gary. This little big guy was dreamt up by the one and only Lee Kiernan from the crushing and most necessary band IDLES!

Gary started as a simple request to create a compact version of the now discontinued Gray Channel®, which was a mainstay on Lee’s board and a big part of his main drive tone. This was all fine and good, and sounded quite sick, but Gary was demanding that we look deeper and explore his dark side a little more, Gary after dark, Saturday night Gary. So, we sat him down and began the trek of figuring out old Gare-Bear once and for all. The result is a dynamic and destructive pulse width modulated fuzz paired with a natural-sounding op-amp overdrive.

Design Notes

Gary’s right brain consists of a dynamic and destructive fuzz that is both domineering and interactive. It is a ripping fuzz tone with an envelope-controlled variable pulse width and enough volume to blow everything up. This nasty little fuzz turns the signal into a square wave and allows you to dynamically adjust the duty cycle with pick attack. Yes! controls the sensitivity of the envelope. When this is all the way down you will get an unadulterated thick and heavy square wave fuzz tone that will sustain for days and go dead quiet when you stop playing. As you increase the Yes! control, the envelope becomes more interactive, and the pulse width narrows the harder you hit it. As the pulse width narrows, the tone becomes more nasal and biting until it gets so narrow that Gary goes to his dark place and disappears completely. In other words, with higher sensitivity settings, the sound will disappear entirely and come cruising back to Gary’s big guy tone. With proper playing dynamics, this creates a very cool effect that can sound like an exploding amp coming in and out of life, blown through a phase shifter.

Gary’s left brain displays his softer side. This is a simple and natural sounding overdrive that keeps your tone lively and drives your amp crazy. This side is based on the green channel of our Gray Channel, which is our take on the classic little yellow overdrive that started it all for us. Lee used this pedal with the clipping switch permanently set to the middle position, which removes all the diodes from the circuit, producing a full-bodied, cutting opamp distortion with plenty of volume on tap. We have reproduced that tone here with exacting precision. Go sets the opamp drive and can range from a simple full-range clean boost all the way up to a smooth and natural distortion. In conjunction with That’s It, which is the master volume for the drive side, you can use Gary’s softer side as a clean boost to push your amp into overdrive or turn up Go and use all of Gary’s internal magic to create the finely tuned dirt you desire.

Controls

Go: Gain control for the overdrive. Turn this up to increase the opamp gain to a thick and full distortion, or turn it down and turn up That’s It to use it as a clean boost.
That’s It: Master volume for the overdrive side.
Left Footswitch: Overdrive
Yes!: Sets the sensitivity for the envelope that controls the duty cycle for the square wave fuzz. The envelope is highly dependent on the level of the incoming signal, which can be affected by any gain pedals in front of Gary, pickup strength, source instrument, etc.
Oosh: Master volume for the fuzz side.
Right Footswitch: Fuzz

TECH SPECS

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
Current Draw: 20 mA
Fuzz
- Input Impedance: 1 MΩ
- Output Impedance: <1 kΩ
Overdrive
- Input Impedance: 500 kΩ
- Output Impedance: <1 kΩ
TRS expression pedal wiring
- Tip: Wiper
- Ring: +3.3V
- Sleeve: Ground
Flexi-Switch® Technology
- This device features Flexi-Switch® Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.
- For standard latching operation: tap the footswitch once to activate the effect and then tap again to bypass.
- For momentary operation: hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.
- Since the switching is relay based, it requires power to pass signal.
Power
- This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!
Artwork
- Artwork by Charlotte Gosch, studio other types

Shipping & Returns

Free Shipping

Most orders over $99.00 ship for free inside the lower 48 states. Certain items that are large and heavy do not qualify for free shipping.

We Ship Worldwide!

For information on International Shipping, please call, email or use live chat for rates. Orders shipping outside the Lower 48 States to Hawaii, Alaska, Puerto Rico and international orders do not qualify for free shipping. Orders shipping to U.S. Military APO/FPO addresses, PO Boxes, and US territories (Guam, Virgin Islands, etc.) can only ship USPS. NOTE: Boxes over 70 lbs each cannot be shipped to these locations.

As a security precaution, orders over $200.00 will only ship to the address your credit card company has on file for you.

*Korg and Mesa/Boogie products are only available for shipment within the USA.

Returns

We want you to be completely happy with your purchase, so we offer a 48 hour approval period on most purchases (see exclusions below). The 48 hour approval period begins when your purchased item is delivered to your door. If after 48 hours you’re not happy with the item, just contact us via phone, email or live chat on our website to arrange for a return authorization (RA#) and return shipping instructions. Any package sent back without prior authorization will be refused.

Returns must be shipped back to us within two days of the RA being issued. Items must come back to us undamaged and in the same condition they were shipped out. All manuals, paperwork, cables, tremolo arms, wrenches, etc… must be included or full credit will not be issued. Any items not conforming to this policy will be subject (at our discretion) to a restocking fee of 20% of the purchase price.

Refunds will be issued minus all related shipping expenses, if free shipping was initially given, the cost we incurred to get the item to you will be deducted from your refund. A 10% restock fee will also be deducted from your refund. Restock fees will be waived for full value exchanges.

Here are exceptions to our return policy.

Custom orders of any kind are non returnable and non refundable. We often charge a deposit before we will place a custom or special order. All special order deposits are NON REFUNDABLE, no exceptions.
Microphones, Harmonicas, In-Ear Systems and any other items that come into contact with your mouth or ears.
Items labeled as BLOWOUT, are non-returnable. These are often being sold below cost and are considered “all sales final”.
Software (this may also include hardware that includes software), unless still in shrink wrap with barcode affixed.
Guitar strings, blank media, and other disposable merchandise.
Guitar or bass pickups that have been installed or used in any way.
Any item advertised as “USED” is non returnable.

*Payments for music lessons are non refundable, no exceptions.

View our detailed Return Policy here.

Early Order Cancellation

All deposits are non refundable. Lots of our products are special orders and in many cases your order has to be built for you at the factory. This is what makes a lot of our products special. Once your order is started, it's being put together just for you. For this reason we ask that you don't cancel your order after you place it with us. If for some reason you absolutely have to cancel your order with us, we will assess you a 25% cancellation charge. This amount is equal to 25% of your total order amount. Ask us before you place your order to see if what you're purchasing is considered a special order.

Damaged Merchandise

Do not accept your shipment if the package shows any signs of external damage. After the item is returned to us we will ship you a replacement. If you receive incorrect or defective merchandise, please call 781-335-0700 within 5 days for a return authorization number.