Description
This is a used pedal. It has been tested and gone over by the experts at our shop to ensure it’s working properly and is free of issues, unless otherwise noted in this listing. Please see pictures provided and the notes below for condition and wear. It will be packed with care to be shipped to your door! If you have any questions about this or any other piece of gear we have, please let us know and we’ll be happy to help!
Condition Notes:
– Condition: 9/10
– Any wear of note: Some very very light general wear but nothing of note. Well maintained. In overall really amazing shape! Includes power cable and will ship in it’s original box.
From Fractal Audio:
Fractal-Quality Effects in a Floor Unit
The FX8 Mark II is a new multi-effects pedalboard designed to deliver Fractal’s signature quality without compromise in an effects-only floor unit. FX8 runs up to eight simultaneous effects using the state-of-the-art algorithms made famous in the Axe-Fx II line of processors. It features a rugged steel chassis with aircraft aluminum end-panels, convenient top handle, eleven quiet, durable solid state footswitches with no mechanical contacts to fail, 27 LEDs in three colors, five knobs beneath a bright display, Humbuster™ outputs to eliminate hum due to ground loops (when used with Humbuster™ cables), dual TRS relays for amp switching, two switch/expression pedal jacks, USB, MIDI and more. The unit is designed for unity gain and offers true bypass. Above all, it features an extremely high quality signal path to deliver ultra-low noise and pristine sound quality. In other words, “no tone suck!”
In comparison to the original FX8, the new Mark II has an all-black aircraft aluminum bezel and end panels, improved top-panel silkscreen design, an 18dB instrument input pad option, and an even lower noise floor.
Onboard preset memories let you create 128 totally different pedalboards. Every effect in every preset can be run in series or parallel. Using the optional “four cable” setup, you can place each effect “PRE” (between guitar and amp, where pedals go) or “POST” (in the amp’s send/return loop, where rack effects are typically placed).
Use Stompbox Mode on the FX8 for traditional effect “tap dance” switching, or leverage the eight SCENES in each preset to engage pre-defined effect combinations from a single switch. Many effects also offer “XY” switching, which gives them two completely different sound settings: imagine dialing in a single drive pedal with both “Overdrive” and “Fuzz” channels, or a reverb with foot-selectable “spring” and “hall” sounds. Scenes provide a kind of control very similar to traditional “loop switcher” rigs.
The fantastically flexible modifier system enables easy real-time sound changes. You can connect up to two expression pedals (like the Fractal Audio EV-1) to control Wah, Whammy, Volume, or virtually anything else. Utilize MIDI or onboard controllers for automated dynamic effects. A precision tuner, two global equalizers and a dedicated, global 4-minute stereo Looper are also built-in.
FX8-EDIT, a full-featured software editor, is also included free. In the tradition of all Fractal Audio Systems products, the FX8 is fully compatible with Fractal-Bot for preset sharing, easy backup and restore, plus firmware updates as new features are added.
FX8 Effect Types
The FX8 offers a stunning array of stompbox and studio effects, all based on the effect algorithms made famous by our Axe-Fx II line of processors. Effects are placed as “blocks,” many of which can be configured as various effect “types”. For instance, the DRIVE block includes simulations of 34+ different fuzz, overdrive, distortion, and boost pedals. The DELAY block offers types for analog, digital, tape, and more.
Features
- FX8 is an advanced multi-effects processor, perfect for guitar, bass, and other instruments.
- “Built Like a Tank” with a powder-coated steel chassis and aircraft aluminum end panels.
- Eleven quiet, durable solid state footswitches with no mechanical contacts to fail. 27 LEDs!
- Two onboard TRS RELAYS to control your amp’s channel or effect switching.
- Two onboard PEDAL jacks to connect footswitches or expression pedals.
- FX8 can control or respond to other MIDI gear in your rig with MIDI IN and OUT/THRU ports.
- Easy-to-use with a 160×80px display, 6 buttons, 5 knobs, and minimal menu diving.
- 128 PRESETS allow you to create 128 completely different pedalboards.
- Up to eight simultaneous effects per preset, with state-of-the-art “Fractal-quality” algorithms.
- Each effect can be configured as desired: Pre/Post, Series/Parallel.
- “Stompbox Mode” provides traditional ON/OFF switching, plus XY switching (with press & hold).
- “XY” gives many effects two completely different sets of settings for maximum sonic flexibility.
- Eight SCENES/preset allow you to load effect ON/OFF and X/Y “combos” (plus relays and MIDI.)
- “Modifiers” allow real-time control of many parameters via MIDI, pedals, or controllers.
- Designed for UNITY GAIN (both PRE and POST) and featuring TRUE BYPASS.
- High quality converters deliver ultra-low noise and pristine audio. No tone suck!
- Humbuster™ outputs help defeat ground hum (when used with Humbuster™ Cables).
- Built-in global IN and OUT VOLUME (pedal-assignable) & dual global 10-band Graphic EQ.
- Every preset includes a built-in dedicated global 4-MINUTE LOOPER (8m in mono)
- USB for connection to a Mac or PC for easy editing, backup/restore, and firmware updates.
- FX8-Edit, a free editor/librarian, gives user-friendly access to all sound settings.
- And more!
