Description
This is a used Empress Compressor MKII pedal. The item pictured is the one you will receive. It has been tested and gone over by the experts at our shop to ensure it’s working properly and is free of issues, unless otherwise noted in this listing. Please read the description carefully and check over all photos for condition and wear. We do our best to describe all items as best as possible and note any wear we find, but please be considerate that it is a used piece and it won’t be perfect. We pack all items with care when shipping them. If you have any questions about this or any other piece of gear we have, please let us know and we’ll be happy to help!
————————-
Condition Notes:
– Condition: 9/10
– Any wear of note: The pedal is in overall really amazing shape and very clean with no wear of note!
– General notes: This is an absolutely stellar compressor for Empress! With impeccable build quality and design and a feature set that’s so dialed in and versatile for the perfect tone bed!
– Accessories included: None. Only the pedal is included. (Does NOT included any original box, packaging etc.)
————————-
From Empress:
Compressor MKII
When we released our original Compressor back in 2011, it quickly became a favourite among guitar and bass players alike who were searching for something more than the typical oversimplified controls found on most compressor pedals. Now, based on our users’ valuable feedback, we’ve taken everything great about our original Compressor and made it even better.
On top of the full range of features and controls normally only seen in high end studio equipment, such as input and gain reduction metering, independent attack and release controls, a mix knob for parallel compression, and an external sidechain insert, we’ve now added a ‘tilt’ tone eq control, and a selectable sidechain high pass filter built into the Compressor’s detection circuit.
———-
Features
- FET compressor with transparent, all-analog signal path
- Multi-segment metering for input and gain reduction
- Selectable 2:1, 4:1, and 10:1 ratios
- Sidechain input with selectable high-pass filter
- Mix knob for parallel compression
- Tilt EQ centred at 500Hz
- True bypass switching
———-
Transparent Analog Signal Path
Experience pure analog compression without any digital interference. The Compressor MKII features FET compression that preserves your instrument’s original tone while adding dynamic control. Choose from 2:1, 4:1, and 10:1 compression ratios for a wide range of dynamic control options. Fine-tune the compression characteristics with independent attack and release controls for precise adjustments.
Delightfully Designed
The new enclosure is approximately half the size of the original compressor, saving space on your pedalboard, and is available in undeniable blue or silver sparkle finishes.
Advanced Metering and Parallel Compression
Monitor both gain reduction and input levels with separate meters for clear, accurate feedback. Blend uncompressed and compressed signals using the Mix control for New York-style parallel compression.
Tone and Sidechain Features
The tone knob is a “tilt” style EQ centered at 500Hz to nail that perfect tone. The internal sidechain is controlled by a 3-position switch: 120Hz, 240Hz, and off. The sidechain switch (120Hz, 240Hz, and off) helps to maintain clarity by preventing unwanted low-frequency pumping. For even greater control and flexibility, utilize the 3.5mm TRS jack send and return for external sidechain compression.
———-
Specifications
- Input Impedance: 1M
- Output Impedance: 2.2k
- Frequency Response (-3dB): 20Hz – 20kHz
- Distortion: less than 0.1%
- Noise: 101dB
- Power Input Voltage: 9V DC (Negative tip)
- Input Power: 2.1mm barrel (Centre Negative)
- Power Consumption: ~100mA
- Enclosure Material: Die Cast Aluminum
- Input connector: 1/4″ Jack
- Output connector: 1/4″ Jack
- Height (Enclosure only): 1.5″
- Height (including controls): 2.5″
- Length: 4.8″
- Width: 2.6″
- Weight: 1lbs












